close Warning: Error with navigation contributor "LoginModule"

Changes between Version 1 and Version 2 of TracStandalone


Ignore:
Timestamp:
Aug 25, 2011, 10:32:27 AM (13 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracStandalone

    v1 v2  
    11= Tracd = 
    22 
    3 Tracd is a lightweight standalone Trac web server. In most cases it's easier to setup and runs faster than the [wiki:TracCgi CGI script]. 
     3Tracd is a lightweight standalone Trac web server. 
     4It can be used in a variety of situations, from a test or development server to a multiprocess setup behind another web server used as a load balancer. 
    45 
    56== Pros == 
    67 
    78 * Fewer dependencies: You don't need to install apache or any other web-server. 
    8  * Fast: Should be almost as fast as the [wiki:TracModPython mod_python] version (and much faster than the [wiki:TracCgi CGI]). 
     9 * Fast: Should be almost as fast as the [wiki:TracModPython mod_python] version (and much faster than the [wiki:TracCgi CGI]), even more so since version 0.12 where the HTTP/1.1 version of the protocol is enabled by default 
    910 * Automatic reloading: For development, Tracd can be used in ''auto_reload'' mode, which will automatically restart the server whenever you make a change to the code (in Trac itself or in a plugin). 
    1011 
    1112== Cons == 
    1213 
    13  * Fewer features: Tracd implements a very simple web-server and is not as configurable or as scalable as Apache HTTPD. 
     14 * Fewer features: Tracd implements a very simple web-server and is not as configurable or as scalable as Apache httpd. 
    1415 * No native HTTPS support: [http://www.rickk.com/sslwrap/ sslwrap] can be used instead, 
    1516   or [http://trac.edgewall.org/wiki/STunnelTracd stunnel -- a tutorial on how to use stunnel with tracd] or Apache with mod_proxy. 
     
    4041To exit the server on Windows, be sure to use {{{CTRL-BREAK}}} -- using {{{CTRL-C}}} will leave a Python process running in the background. 
    4142 
    42 When running as a Windows service using a utility such as [http://www.google.com/search?q=srvany.exe SRVANY], stopping or restarting the service will also leave a Python process running -- restart the system instead. 
    43  
     43== Installing as a Windows Service == 
     44 
     45=== Option 1 === 
     46To install as a Windows service, get the [http://www.google.com/search?q=srvany.exe SRVANY] utility and run: 
     47{{{ 
     48 C:\path\to\instsrv.exe tracd C:\path\to\srvany.exe 
     49 reg add HKLM\SYSTEM\CurrentControlSet\Services\tracd\Parameters /v Application /d "\"C:\path\to\python.exe\" \"C:\path\to\python\scripts\tracd-script.py\" <your tracd parameters>" 
     50 net start tracd 
     51}}} 
     52 
     53'''DO NOT''' use {{{tracd.exe}}}.  Instead register {{{python.exe}}} directly with {{{tracd-script.py}}} as a parameter.  If you use {{{tracd.exe}}}, it will spawn the python process without SRVANY's knowledge.  This python process will survive a {{{net stop tracd}}}. 
     54 
     55If you want tracd to start automatically when you boot Windows, do: 
     56{{{ 
     57 sc config tracd start= auto 
     58}}} 
     59 
     60The spacing here is important. 
     61 
     62{{{#!div 
     63Once the service is installed, it might be simpler to run the Registry Editor rather than use the `reg add` command documented above.  Navigate to:[[BR]] 
     64`HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\tracd\Parameters` 
     65 
     66Three (string) parameters are provided: 
     67||!AppDirectory ||C:\Python26\ || 
     68||Application ||python.exe || 
     69||!AppParameters ||scripts\tracd-script.py -p 8080 ... || 
     70 
     71Note that, if the !AppDirectory is set as above, the paths of the executable ''and'' of the script name and parameter values are relative to the directory.  This makes updating Python a little simpler because the change can be limited, here, to a single point. 
     72(This is true for the path to the .htpasswd file, as well, despite the documentation calling out the /full/path/to/htpasswd; however, you may not wish to store that file under the Python directory.) 
     73}}} 
     74 
     75For Windows 7 User, srvany.exe may not be an option, so you can use [http://www.google.com/search?q=winserv.exe WINSERV] utility and run: 
     76{{{ 
     77"C:\path\to\winserv.exe" install tracd -displayname "tracd" -start auto "C:\path\to\python.exe" c:\path\to\python\scripts\tracd-script.py <your tracd parameters>" 
     78 
     79net start tracd 
     80}}} 
     81 
     82=== Option 2 === 
     83 
     84Use [http://trac-hacks.org/wiki/WindowsServiceScript WindowsServiceScript], available at [http://trac-hacks.org/ Trac Hacks]. Installs, removes, starts, stops, etc. your Trac service. 
    4485 
    4586== Using Authentication == 
    4687 
    47 Using tracd with Apache .htpasswd files: 
    48  
    49 To create a .htpasswd file using htpasswd: 
    50  
    51 {{{ 
    52 sudo htpasswd -c /path/to/env/.htpasswd username 
     88Tracd provides support for both Basic and Digest authentication. Digest is considered more secure. The examples below use Digest; to use Basic authentication, replace `--auth` with `--basic-auth` in the command line. 
     89 
     90The general format for using authentication is: 
     91{{{ 
     92 $ tracd -p port --auth="base_project_dir,password_file_path,realm" project_path 
     93}}} 
     94where: 
     95 * '''base_project_dir''': the base directory of the project specified as follows: 
     96   * when serving multiple projects: ''relative'' to the `project_path` 
     97   * when serving only a single project (`-s`): the name of the project directory 
     98 Don't use an absolute path here as this won't work. ''Note:'' This parameter is case-sensitive even for environments on Windows. 
     99 * '''password_file_path''': path to the password file 
     100 * '''realm''': the realm name (can be anything) 
     101 * '''project_path''': path of the project 
     102 
     103 * **`--auth`** in the above means use Digest authentication, replace `--auth` with `--basic-auth` if you want to use Basic auth.  Although Basic authentication does not require a "realm", the command parser does, so the second comma is required, followed directly by the closing quote for an empty realm name. 
     104 
     105Examples: 
     106 
     107{{{ 
     108 $ tracd -p 8080 \ 
     109   --auth="project1,/path/to/passwordfile,mycompany.com" /path/to/project1 
     110}}} 
     111 
     112Of course, the password file can be be shared so that it is used for more than one project: 
     113{{{ 
     114 $ tracd -p 8080 \ 
     115   --auth="project1,/path/to/passwordfile,mycompany.com" \ 
     116   --auth="project2,/path/to/passwordfile,mycompany.com" \ 
     117   /path/to/project1 /path/to/project2 
     118}}} 
     119 
     120Another way to share the password file is to specify "*" for the project name: 
     121{{{ 
     122 $ tracd -p 8080 \ 
     123   --auth="*,/path/to/users.htdigest,mycompany.com" \ 
     124   /path/to/project1 /path/to/project2 
     125}}} 
     126 
     127=== Basic Authorization: Using a htpasswd password file === 
     128This section describes how to use `tracd` with Apache .htpasswd files. 
     129 
     130To create a .htpasswd file use Apache's `htpasswd` command (see [#GeneratingPasswordsWithoutApache below] for a method to create these files without using Apache): 
     131{{{ 
     132 $ sudo htpasswd -c /path/to/env/.htpasswd username 
    53133}}} 
    54134then for additional users: 
    55135{{{ 
    56 sudo htpasswd /path/to/env/.htpasswd username2 
    57 }}} 
    58 then for starting the tracd: 
    59 {{{ 
    60 tracd -p 8080 --basic-auth=environmentname,/fullpath/environmentname/.htpasswd,/fullpath/environmentname /fullpath/environmentname 
    61 }}} 
    62  
    63  
    64 Tracd provides support for both Basic and Digest authentication. The default is to use Digest; to use Basic authentication, replace `--auth` with `--basic-auth` in the examples below. (You must still specify a dialogic "realm", which can be an empty string by trailing the BASICAUTH with a comma.) 
    65  
    66   ''Support for Basic authentication was added in version 0.9.'' 
    67  
    68 The general format for using authentication is: 
    69  
    70 {{{ 
    71  $ tracd -p port --auth=base_project_dir,password_file_path,realm project_path 
    72 }}} 
    73  
    74 where: 
    75  
    76  * '''base_project_dir''' is the base directory of the project; note: this doesn't refer to the project name, and it is case-sensitive even for windows environments 
    77  * '''password_file_path''' path of the password file 
    78  * '''realm''' realm 
    79  * '''project_path''' path of the project 
    80  
    81 Example: 
    82  
    83 {{{ 
    84  $ tracd -p 8080 \ 
    85    --auth=project1,/path/to/users.htdigest,mycompany.com /path/to/project1 
    86 }}} 
    87 Of course, the digest file can be be shared so that it is used for more than one project: 
    88 {{{ 
    89  $ tracd -p 8080 \ 
    90    --auth=project1,/path/to/users.htdigest,mycompany.com \ 
    91    --auth=project2,/path/to/users.htdigest,mycompany.com \ 
    92    /path/to/project1 /path/to/project2 
    93 }}} 
    94  
    95 Another way to share the digest file is to specify "*" 
    96 for the project name: 
    97 {{{ 
    98  $ tracd -p 8080 \ 
    99    --auth="*",/path/to/users.htdigest,mycompany.com \ 
    100    /path/to/project1 /path/to/project2 
    101 }}} 
    102 If using the `-s` parameter for serving a Trac environment from the root of a domain, one must use `*` for the project name 
    103  
    104 == How to set up an htdigest password file == 
     136 $ sudo htpasswd /path/to/env/.htpasswd username2 
     137}}} 
     138 
     139Then to start `tracd` run something like this: 
     140{{{ 
     141 $ tracd -p 8080 --basic-auth="projectdirname,/fullpath/environmentname/.htpasswd,realmname" /fullpath/environmentname 
     142}}} 
     143 
     144For example: 
     145{{{ 
     146 $ tracd -p 8080 --basic-auth="testenv,/srv/tracenv/testenv/.htpasswd,My Test Env" /srv/tracenv/testenv 
     147}}} 
     148''Note:'' You might need to pass "-m" as a parameter to htpasswd on some platforms (OpenBSD). 
     149 
     150=== Digest authentication: Using a htdigest password file === 
    105151 
    106152If you have Apache available, you can use the htdigest command to generate the password file. Type 'htdigest' to get some usage instructions, or read [http://httpd.apache.org/docs/2.0/programs/htdigest.html this page] from the Apache manual to get precise instructions.  You'll be prompted for a password to enter for each user that you create.  For the name of the password file, you can use whatever you like, but if you use something like `users.htdigest` it will remind you what the file contains. As a suggestion, put it in your <projectname>/conf folder along with the [TracIni trac.ini] file. 
     
    108154Note that you can start tracd without the --auth argument, but if you click on the ''Login'' link you will get an error. 
    109155 
    110 == Generating Passwords Without Apache == 
    111  
    112 If you don't have Apache available, you can use this simple Python script to generate your passwords: 
     156=== Generating Passwords Without Apache === 
     157 
     158Basic Authorization can be accomplished via this [http://www.4webhelp.net/us/password.php online HTTP Password generator].  Copy the generated password-hash line to the .htpasswd file on your system. 
     159 
     160You can use this simple Python script to generate a '''digest''' password file: 
    113161 
    114162{{{ 
     
    144192}}} 
    145193 
    146 Note: If you use the above script you must use the --auth option to tracd, not --basic-auth, and you must set the realm in the --auth value to 'trac' (without the quotes). Example usage (assuming you saved the script as trac-digest.py): 
    147  
    148 {{{ 
    149 python trac-digest.py -u username -p password >> c:\digest.txt 
    150 tracd --port 8000 --auth=proj_name,c:\digest.txt,trac c:\path\to\proj_name 
    151 }}} 
    152  
    153 Note: If you would like to use --basic-auth you need to use htpasswd tool from apache server to generate .htpasswd file. The remaining part is similar but make sure to use empty realm (i.e. coma after path). When using on Windows make sure to use -m option for it (did not tested it on *nix, so not sure if that is the case there).  If you do not have Apache, [trac:source:/tags/trac-0.11b2/contrib/htpasswd.py htpasswd.py] may help.  (Note that it requires a `crypt` or `fcrypt` module; see the source comments for details.) 
    154  
    155 It is possible to use md5sum utility to generate digest-password file using such method: 
    156 {{{ 
    157 echo -e "${user}:trac:${password}\c" | md5sum - >>to-file 
    158 }}} 
    159 and manually delete " -" from the end and add "${user}:trac:" to the start of line from 'to-file'. You can see attachment:trac-digest-corrected.sh for detail. 
     194Note: If you use the above script you must set the realm in the `--auth` argument to '''`trac`'''. Example usage (assuming you saved the script as trac-digest.py): 
     195 
     196{{{ 
     197 $ python trac-digest.py -u username -p password >> c:\digest.txt 
     198 $ tracd --port 8000 --auth=proj_name,c:\digest.txt,trac c:\path\to\proj_name 
     199}}} 
     200 
     201==== Using `md5sum` 
     202It is possible to use `md5sum` utility to generate digest-password file: 
     203{{{ 
     204 $ printf "${user}:trac:${password}" | md5sum - >>user.htdigest 
     205}}} 
     206and manually delete " -" from the end and add "${user}:trac:" to the start of line from 'to-file'. 
     207 
     208== Reference == 
     209 
     210Here's the online help, as a reminder (`tracd --help`): 
     211{{{ 
     212Usage: tracd [options] [projenv] ... 
     213 
     214Options: 
     215  --version             show program's version number and exit 
     216  -h, --help            show this help message and exit 
     217  -a DIGESTAUTH, --auth=DIGESTAUTH 
     218                        [projectdir],[htdigest_file],[realm] 
     219  --basic-auth=BASICAUTH 
     220                        [projectdir],[htpasswd_file],[realm] 
     221  -p PORT, --port=PORT  the port number to bind to 
     222  -b HOSTNAME, --hostname=HOSTNAME 
     223                        the host name or IP address to bind to 
     224  --protocol=PROTOCOL   http|scgi|ajp 
     225  -q, --unquote         unquote PATH_INFO (may be needed when using ajp) 
     226  --http10              use HTTP/1.0 protocol version (default) 
     227  --http11              use HTTP/1.1 protocol version instead of HTTP/1.0 
     228  -e PARENTDIR, --env-parent-dir=PARENTDIR 
     229                        parent directory of the project environments 
     230  --base-path=BASE_PATH 
     231                        the initial portion of the request URL's "path" 
     232  -r, --auto-reload     restart automatically when sources are modified 
     233  -s, --single-env      only serve a single project without the project list 
     234}}} 
    160235 
    161236== Tips == 
     
    163238=== Serving static content === 
    164239 
    165 If `tracd` is the only webserver used for the project,  
     240If `tracd` is the only web server used for the project,  
    166241it can also be used to distribute static content  
    167242(tarballs, Doxygen documentation, etc.) 
     
    172247Example: given a `$TRAC_ENV/htdocs/software-0.1.tar.gz` file, 
    173248the corresponding relative URL would be `/<project_name>/chrome/site/software-0.1.tar.gz`,  
    174 which in turn can be written using the relative link syntax 
    175 in the Wiki: `[/<project_name>/chrome/site/software-0.1.tar.gz]`  
    176  
    177 The development version of Trac supports a new `htdocs:` TracLinks  
    178 syntax for the above. With this, the example link above can be written simply  
    179 `htdocs:software-0.1.tar.gz`.  
    180  
    181 === Using apache rewrite rules === 
    182 In some situations when you choose to use tracd behind apache, you might experience issues with redirects, like being redirected to URLs with the wrong host or protocol. In this case (and only in this case), setting the `[trac] use_base_url_for_redirect` to `true` can help, as this will force Trac to use the value of `[trac] base_url` for doing the redirects. 
     249which in turn can be written as `htdocs:software-0.1.tar.gz` (TracLinks syntax) or `[/<project_name>/chrome/site/software-0.1.tar.gz]` (relative link syntax).  
     250 
     251 ''Support for `htdocs:` TracLinks syntax was added in version 0.10'' 
     252 
     253=== Using tracd behind a proxy 
     254 
     255In some situations when you choose to use tracd behind Apache or another web server. 
     256 
     257In this situation, you might experience issues with redirects, like being redirected to URLs with the wrong host or protocol. In this case (and only in this case), setting the `[trac] use_base_url_for_redirect` to `true` can help, as this will force Trac to use the value of `[trac] base_url` for doing the redirects. 
     258 
     259If you're using the AJP protocol to connect with `tracd` (which is possible if you have flup installed), then you might experience problems with double quoting. Consider adding the `--unquote` parameter. 
     260 
     261See also [trac:TracOnWindowsIisAjp], [trac:TracNginxRecipe]. 
    183262 
    184263=== Serving a different base path than / === 
    185264Tracd supports serving projects with different base urls than /<project>. The parameter name to change this is 
    186265{{{ 
    187 tracd --base-path=/some/path 
     266 $ tracd --base-path=/some/path 
    188267}}} 
    189268 
    190269---- 
    191 See also: TracInstall, TracCgi, TracModPython, TracGuide, [trac:TracOnWindowsStandalone?version=13#RunningTracdasservice Running tracd.exe as a Windows service] 
     270See also: TracInstall, TracCgi, TracModPython, TracGuide, [trac:TracOnWindowsStandalone#RunningTracdasservice Running tracd.exe as a Windows service]